:: Welcome to Jacsons Veneers ::

:: THE PREHUNG DOOR

The Pre-Hung Door – What is it?
A pre-hung door is a fully self contained solution for a door opening, pre-finished at the factory, consisting of an engineered door frame called the door jamb, the door and architraves – all polished and supplied along with locks and hinges.

What Are The Advantages Of A Pre-hung Door Over The Traditional Doors & Frames?

1.	Pre-hung doors are made with engineered ecofriendly materials which have in-built properties to withstand climatic changes and have very high resistance to termites.
2.	Traditional door frames are installed when civil work begins on a building and as a result, the wooden frame absorbs all the water used in the process of construction. The water could cause the door to warp and twist over time. On the other hand, the pre-hung doors are installed after all the civil work has been completed and the premises are free from water, paint and other solvents.
3.	Traditional frames are manufactured at the site and the civil contractor has to take responsibility for purchasing and processing the wood apart from managing a huge work force on site for deployment. Door Jambs however comes as ready to use and the civil contractor only needs to arrange for the installation on site.
4.	Traditional door frames tend to be more crude in appearance and often does not match the natural finish of the door. Pre-hung doors are full assembled at the factory, maintaining the same sophistication and finish for the door, jamb and architraves.
5.	The traditional door frames are fixed directly to the wall with the aid of metal clamps and as a result the frames continuously absorb the moisture from the walls. Door Jambs however are fixed a few millimeters away from the wall and are protected by a layer f expandable Poly-Urethane foam which protects the Jambs from any moisture absorption from the civil structure.
6.	Traditional frames do not cover the entire thickness of the wall. Door Jambs cover the entire thickness of the wall and also come with very attractive architraves on both sides of the wall – giving a very rich look to the space it goes into.

Doors

Jacsons ® is the first to introduce the concept of light-weight doors in India . A good door should be light in weight, structurally sound and designed to suit the environment it would be palced in. Each Jacsons ® door is checked for structural stability prior to deployment. Jacsons ® also offers the finest range of Veneered Flush Doors, Moulded Panel Doors and Designer Veneer Doors.

Types of Doors offered by Jacsons ®

Veneered Flush Doors

Jacsons ® the pioneer manufacturers of veneers in India offers the largest range of decorative wood veneers for your doors. From exquisite Indian Rosewood to Burma Teak, European Beach , English Mahogany, African Sapali to American Oak – you have an unlimited spread of natural wood to select from.

Moulded Panel Doors

Moulded Panel door is an alternative to solid wood panel doors that are vulnerable to shriking, splitting and warping. The skins are made of wood fibre mat moulded under intensive heat and pressure into high-density fibre boards. Moulded skin doors are highly attractive, cost effective and long lasting.

Designer Veneer Doors

Jacsons ® has introduced a range of “book-matched” designs combining different veneers to satisfy the tastes of all customers. We also offer custom-made designs as per specific client requirements.

Core Filling

Much research has gone into finding the best fillings for the core. The quality of a flush door depends on its construction and core filling. Our doors come with Lignocellulosic Core Filling, Flax Board Core Filling or Extruded Particle Board Core Filling, all of which are eco-friendly and conforming to European Standards of door production. These doors are strong sturdy and solid in construction, light in weight compared to conventional solid wood core and are highly moisture resistant.

Adhesives used for Bonding

The adhesives we use are imported two component-thermosetting Poly Vinyl Urethane, which makes our doors moisture resistant.

Weight of Doors

Doors with Cellular Core – Weight approx 8 Kg per sqm.

Doors with Flax or Extruded Core – Weight approx 16 Kg per sqm.

All rights (C) reserved for www.jacsonsveneers.com 2007